• BRC 2.5/5/10 Ton 127/140/151 mm Pull Hydraulic Cylinder-1-SAIVS
BRC 2.5/5/10 Ton 127/140/151 mm Pull Hydraulic Cylinder-1-SAIVS

BRC 2.5/5/10 Ton 127/140/151 mm Pull Hydraulic Cylinder

5out of5 based on17 reviews | Write a review
  • Model Number:BRC25/BRC46/BRC106

    Capacity:2.5/5/10 ton/24/51/105 KN

    Stroke:127/140/151 mm/5/5.5/6.1 in

    Maximum Operating Pressure:700 bar/10000 PSI

    Weight:1.8-9.5 kg/4-21 lbs

    Oil Capacity:45-228 cm³/2.76-13.8 in³

    Material:Steel

    Minimum Order:1Piece

    Manufacturer:SAIVS

    Country of Origin:China

  • CONTACT NOW
  • PDF DOWNLOAD

Description

- High Strength alloy steel construction 

- Plunger blow-out protection to prevent rod over-extension 

- Hard chrome-plated plunger for long life 

- Replaceable links on BRP-models 

- Baked enamel finish for increased corrosion resistance 

- CR-400 coupler and dust cap included on all models 

- Plunger wiper reduces contamination,extending cylinder life 

- Single-Acting, spring return


Two BRC Pull Hydraulic Cylinders


BRC Pull Hydraulic Cylinders and Accessories


BRC Pull Cylinders

Ship building,welding and Enerpac pull cylinders go hand in hand.

To lift a load-bearing mast into place, BRP Pull Hydraulic Cylinders were used to tension the supporting cables.

Dimensions

BRC Pull Hydraulic Cylinder Drawing

BRC Cylinder Mounting Dimensions (mm)
Model NumberBase Mounting HoleCollar ThreadCollar Thd. Lgth.Mtg. Thd. Lgth.
BRC25¾"-14 NPT1½"-16 UN2417
BRC461¼"-11½ NPT2¼"-14 UN2624
BRC106M30 x 2M85 x 22524


Model NumberCylinder CapacityStrokeCyl. Effect. AreaOil Cap.Coll. HeightExt. HeightOuts. Dia.Cyl. Bore Dia.Plgr. Dia.Top to Inlet PortSaddle DiameterPlgr. Thd. Lgth.Plunger Outside ThreadWeight
ton (kN)(mm)(cm²)(cm³)A (mm)B (mm)D (mm)E (mm)F (mm)H (mm)J (NPT)P (mm)Q
BRC252.5 (24)1273.5452643914828.41945¾"-14281⅛"-241.8
BRC465 (51)1407.31013014415742.930.2421¼"-11½321⅜"-164.5
BRC10610 (105)151152282894408554.131.839-25M30x29.5

FQAs

Q: What is a Pull Hydraulic Cylinder?

A: A Pull Hydraulic Cylinder is a type of hydraulic device that generates pulling force rather than pushing force. It is typically used in applications where pulling loads back or working in confined spaces is required. The piston rod of the pull hydraulic cylinder retracts under external force, performing work through hydraulic fluid pressure.


Q: What are the typical applications of Pull Hydraulic Cylinders?

A: Pull Hydraulic Cylinders are commonly used in the following applications:

Dismantling and assembly operations, such as machinery repair and maintenance

Construction equipment, like cranes and excavators

Marine and offshore engineering

Industrial automation and manufacturing equipment

Precision control in laboratory and testing equipment


Application

Hydraulic cylinder jacks are used to position bridge sections and beams during construction, allowing for accurate alignment and secure installation.

Automotive mechanics use hydraulic cylinder jacks to raise cars and trucks for various repair and maintenance tasks.

Hydraulic cylinder jacksaid in lifting and positioning heavy materials and equipment within manufacturing facilities.

Hydraulic cylinder jacks assist in the installation and maintenance of pipelines by providing the necessary lifting force for components.

Event organizers use hydraulic cylinder jacks to adjust the height of stages and platforms for performances and presentations.

Wind turbines require periodic maintenance, and hydraulic cylinder jacksenable technicians to reach and service these towering structures.

Railways use hydraulic cylinder jacks to lift locomotives, allowing access for inspections and maintenance.

Comment

The factory's efficient production process resulted in a product that not only meets but surpasses i
The factory's efficient production process resulted in a product that not only meets but surpasses industry standards.
From:Richard Nelson | Date:2023-04-18
SAIVSTOOL.com Responded
We appreciate your feedback as it guides our efforts to exceed your expectations.
This tool arrived earlier than expected.
This tool arrived earlier than expected.
From:Burkhard | Date:2023-05-20
SAIVSTOOL.com Responded
SAIVS always focuses on product quality and delivery speed.
Your relentless pursuit of perfection has raised the bar in our industry.
Your relentless pursuit of perfection has raised the bar in our industry.
From:Elliot Stiles | Date:2023-07-24
SAIVSTOOL.com Responded
We're thrilled that you've had a positive experience with our product. Thank you for letting us know!
Write your review for BRC 2.5/5/10 Ton 127/140/151 mm Pull Hydraulic Cylinder
  • Bad
  • Excellent

PROVIDING EXCELLENT SOLUTIONS BY SAIVS™

You're fortunate to have found a manufacturer, supplier, and factory in China, Ningbo SAIVS Machinery Co., Ltd.,

that offers a diverse selection, reasonable price,fast delivery, and products of comparable quality and performance to Enerpac's BRC 2.5/5/10 Ton 127/140/151 mm Pull Hydraulic Cylinder.

Please send an email immediately with information regarding the "BRC 2.5/5/10 Ton 127/140/151 mm Pull Hydraulic Cylinder" You will receive our response within 24 hours.

Request a Quote