Model:RACH1002
Capacity:100 ton
Stroke:50 mm | 1.97 inches
Weight:33.8 kg | 74.5 lbs
Push Oil Capacity:823 cm³
Warranty:12 months
Minimum Order:1 Pieces
Manufacturer:SAIVS
Country of Origin:China
Maximum Operating Pressure:700 Bar/10000 Psi
Brand Name:Replacement Enerpac's RACH1002
- Model:RACH1002
- Product Line:Industrial Tools
- Type: Hydraulic Cylinder Ram, Hydraulic Jacks
- Customizable with special requirement
Hollow Plunger design allows for both pull and push forces: This means the cylinder can be used to extend (push) or retract (pull) a load because the plunger has a hollow center that allows rods or cables to pass through.
Composite bearings increase cylinder life and sideload resistance: The use of composite materials in the bearings makes them more durable and able to handle loads applied at an angle (side loads) without excessive wear.
Hard-Coat finish on all surfaces resists damage and extends cylinder life: A hard-coat finish on the cylinder surfaces makes them more resistant to scratches, corrosion, and other wear, leading to a longer lifespan.
Floating center tube increases seal and product life: A floating center tube allows for slight misalignment without damaging the seals, which reduces leakage and extends the overall life of the cylinder.
Handles standard on all models: All models come equipped with handles for easier positioning and control.
Steel base plate and saddle for protection against load-induced damage: The base plate and saddle are made of steel for added strength and protection against damage caused by the forces exerted on the cylinder.
Integral stop ring prevents plunger over-travel and is capable of withstanding the full cylinder capacity: The stop ring prevents the plunger from extending beyond its intended limit, protecting the cylinder from damage even at its maximum operating force.
High Strength return spring for rapid cylinder retraction: A strong return spring ensures the plunger retracts quickly after the force is released.
Maximum Operating Pressure (bar) | 700 |
Capacity Class (tonnage) | 100 |
Stroke (mm) | 50 |
Collapsed Height A (mm) | 258 |
Extended Height B (mm) | 308 |
Return Type | Single-Acting, Spring Return |
Plunger Type | Hollow |
Material | 7075-T6 Aluminum Alloy |
Cylinder Effective Area Advance (cm2) | 164.6 |
Oil Capacity Advance (cm3) | 823 |
Surface Treatment | Baked enamel finish |
Coupler | 3/8NPT-18 |
Weight (kg) | 33.8 |
Collapsed Height/mm(A) | 258 |
Extended Height/mm(B) | 308 |
Outside Dia/mm(D) | 250 |
Cylinder Bore Dia/mm(E) | 185 |
Plunger Dia/mm(F) | 145 |
Base To Advance Port/mm(H) | 61 |
Saddle Dia/mm(J) | 145 |
Saddle Protri. From Plgr./mm(K) | 14 |
Center Hole Dia/mm(Y) | 79 |
Base Mounting Holes Bolt Circle/mm(U) | 220 |
Base Mounting Holes Thread(V) | M10 |
Base Mounting Holes Thread Depth/mm(Z) | 12 |
Model Number | Capacity/Ton | Stroke/mm | Cylinder Effective Area/cm2 | Oil Capacity/cm3 | Collapsed Height/mm(A) | Extended Height/mm(B) | Outside Dia/mm(D) | Cylinder Bore Dia/mm(E) | Plunger Dia/mm(F) | Base To Advance Port/mm(H) | Saddle Dia/mm(J) | Saddle Protri. From Plgr./mm(K) | Center Hole Dia/mm(Y) | Base Mounting Holes Bolt Circle/mm(U) | Base Mounting Holes Thread(V) | Base Mounting Holes Thread Depth/mm(Z) | Weight/Kg |
RACH-202 | 20 | 50 mm | 1.97 inches | 32.7 | 164 | 188 | 238 | 100 | 75 | 55 | 29 | 55 | 10 | 27 | 70 | M6 | 12 | 5.2 kg | 11.5 lbs |
RACH-204 | 20 | 100 mm | 3.94 inches | 32,7 | 327 | 251 | 351 | 100 | 75 | 55 | 29 | 55 | 10 | 27 | 70 | M6 | 12 | 6.1 kg | 13.4 lbs |
RACH-206 | 20 | 150 mm | 5.91 inches | 32.7 | 491 | 315 | 465 | 100 | 75 | 55 | 29 | 55 | 10 | 27 | 70 | M6 | 12 | 7.1 kg | 15.7 lbs |
RACH-208 | 20 | 200 mm | 7.87 inches | 32.7 | 654 | 378 | 578 | 100 | 75 | 55 | 29 | 55 | 10 | 27 | 70 | M6 | 12 | 8 kg | 17.6 lbs |
RACH-2010 | 20 | 250 mm | 9.84 inches | 32.7 | 818 | 442 | 692 | 100 | 75 | 55 | 29 | 55 | 10 | 27 | 70 | M6 | 12 | 9 kg | 19.8 lbs |
RACH-302 | 30 | 50 mm | 1.97 inches | 51.1 | 256 | 208 | 258 | 130 | 95 | 70 | 29 | 70 | 10 | 34 | 110 | M6 | 12 | 8 kg | 17.6 lbs |
RACH-304 | 30 | 100 mm | 3.94 inches | 51.1 | 511 | 267 | 367 | 130 | 95 | 70 | 29 | 70 | 10 | 34 | 110 | M6 | 12 | 9.5 kg | 20.9 lbs |
RACH-306 | 30 | 150 mm | 5.91 inches | 51.1 | 766 | 333 | 483 | 130 | 95 | 70 | 29 | 70 | 10 | 34 | 110 | M6 | 12 | 11.2 kg | 24.7 lbs |
RACH-308 | 30 | 200 mm | 7.87 inches | 51.1 | 1022 | 395 | 595 | 130 | 95 | 70 | 29 | 70 | 10 | 34 | 110 | M6 | 12 | 12.9 kg | 28.4 lbs |
RACH-3010 | 30 | 250 mm | 9.84 inches | 51.1 | 1277 | 458 | 708 | 130 | 95 | 70 | 29 | 70 | 10 | 34 | 110 | M6 | 12 | 14.5 kg | 32.0 lbs |
RACH-602 | 60 | 50 mm | 1.97 inches | 84.7 | 423 | 251 | 301 | 180 | 130 | 100 | 61 | 100 | 12 | 54 | 160 | M6 | 12 | 16.2 kg | 35.7 lbs |
RACH-604 | 60 | 100 mm | 3.94 inches | 84.7 | 847 | 315 | 415 | 180 | 130 | 100 | 61 | 100 | 12 | 54 | 160 | M6 | 12 | 19.5 kg | 43.0 lbs |
RACH-606 | 60 | 150 mm | 5.91 inches | 84.7 | 1270 | 380 | 530 | 180 | 130 | 100 | 61 | 100 | 12 | 54 | 160 | M6 | 12 | 25.6 kg | 56.4 lbs |
RACH-608 | 60 | 200 mm | 7.87 inches | 84.7 | 1694 | 445 | 645 | 180 | 130 | 100 | 61 | 100 | 12 | 54 | 160 | M6 | 12 | 26 kg | 57.3 lbs |
RACH-6010 | 60 | 250 mm | 9.84 inches | 84.7 | 2117 | 510 | 760 | 180 | 130 | 100 | 61 | 100 | 12 | 54 | 160 | M6 | 12 | 29.6 kg | 65.3 lbs |
RACH-1002 | 100 | 50 mm | 1.97 inches | 164.6 | 823 | 258 | 308 | 250 | 185 | 145 | 61 | 145 | 14 | 79 | 220 | M10 | 12 | 33.8 kg | 74.5 lbs |
RACH-1004 | 100 | 100 mm | 3.94 inches | 164.6 | 1646 | 325 | 425 | 250 | 185 | 145 | 61 | 145 | 14 | 79 | 220 | M10 | 12 | 39.8 kg | 87.7 lbs |
RACH-1006 | 100 | 150 mm | 5.91 inches | 164.6 | 2487 | 391 | 541 | 250 | 185 | 145 | 61 | 145 | 14 | 79 | 220 | M10 | 12 | 46.2 kg | 101.9 lbs |
RACH-1008 | 100 | 200 mm | 7.87 inches | 164.6 | 3291 | 459 | 659 | 250 | 185 | 145 | 61 | 145 | 14 | 79 | 220 | M10 | 12 | 52.2 kg | 115.1 lbs |
RACH-10010 | 100 | 250 mm | 9.84 inches | 164.6 | 4114 | 527 | 777 | 250 | 185 | 145 | 61 | 145 | 14 | 79 | 220 | M10 | 12 | 58.8 kg | 129.6 lbs |
RACH-1502 | 150 | 50 mm | 1.97 inches | 225.8 | 1129 | 280 | 330 | 275 | 205 | 150 | 61 | 145 | 14 | 79 | 245 | M10 | 12 | 48.9 kg | 107.8 lbs |
RACH-1504 | 150 | 100 mm | 3.94 inches | 225.8 | 2258 | 360 | 460 | 275 | 205 | 150 | 61 | 145 | 14 | 79 | 245 | M10 | 12 | 55.7 kg | 122.8 lbs |
RACH-1506 | 150 | 150 mm | 5.91 inches | 225.8 | 3387 | 430 | 580 | 275 | 205 | 150 | 61 | 145 | 14 | 79 | 245 | M10 | 12 | 63 kg | 138.9 lbs |
RACH-1508 | 150 | 200 mm | 7.87 inches | 225.8 | 4517 | 500 | 700 | 275 | 205 | 150 | 61 | 145 | 14 | 79 | 245 | M10 | 12 | 70.1 kg | 154.5 lbs |
RACH-15010 | 150 | 250 mm | 9.84 inches | 225.8 | 5646 | 570 | 820 | 275 | 205 | 150 | 61 | 145 | 14 | 79 | 245 | M10 | 12 | 77.2 kg | 170.2 lbs |
\
PROVIDING EXCELLENT SOLUTIONS BY SAIVS™
if you are looking for factory manufacturers and suppliers of RACH1002,100 Ton,50 mm,Single Acting Hollow Plunger Aluminum Hydraulic Cylinders,
choose SAIVS TOOL because of the high quality, variety of choices, low price and fast delivery.
you can easily find the best RACH1002,100 Ton,50 mm,Single Acting Hollow Plunger Aluminum Hydraulic Cylinders solution here!
Speak to one of our experts today to learn more about our RACH1002,100 Ton,50 mm,Single Acting Hollow Plunger Aluminum Hydraulic Cylinders products solutions.